moving to gittea needs a push

first relase, including library and GUI application

.gitignore

@@ -9,6 +9,7 @@ __pycache__/
 
 # Distribution / packaging
 .Python
+arduino_timetable_env/
 env/
 build/
 develop-eggs/
@@ -57,4 +58,3 @@ docs/_build/
 
 # PyBuilder
 target/
-

CHANGES.txt

@@ -0,0 +1,4 @@
+Version 0.1.0 (19.09.2017)
+==========================
+
+- first relase, including library and GUI application

README.md

@@ -1,13 +1,72 @@
-# arduino-timetable
+arduino-timetable
+=================
 
 Module to send commands to an Arduino based on a time table.
 
 
-### Regarding Pyinstaller
+Regarding Pyinstaller
+---------------------
 
 As of September 2017 the Pyinstaller version on PyPi is not ready for
-Python 3.6, the developementversion is needed:
+Python 3.6 and / or multiprocessing. I stopped trying to use Pyinstaller
+for distribution. The experiment is still available in the `pyinstaller`
+branch.
 
-~~~
+
-pip install https://github.com/pyinstaller/pyinstaller/tarball/develop
+Installation
-~~~
+------------
+
+As the only prerequisite, [Python (at least version 3.6)][python] must be
+installed. An added bonus points, if [git][git] is also available.
+
+The installation should be performed in a python virtual environment. A virtual
+environment (short: venv) isolates your base python installation from the
+application and vice versa. This procedure is considered a standard procedure
+when working with python applications and scripts.
+
+1. Choose the desired installation path (e.g. a folder in your home directory)
+2. Create a python virtual environment with `python3 -m venv venv-ardunio-timetable`
+3. Activate the environment:
+   - Posix: `source venv-ardunio-timetable/bin/activate`
+   - Windows: `venv-ardunio-timetable\Scripts\activate.bat`
+4. [Download][download] the 'arduino-timetable' and unpack it or use git:
+   `git clone https://git.cpi.imtek.uni-freiburg.de/holgi/arduino-timetable.git`
+5. Change to the new directory and install the software. I would recommend
+   to install the software as a 'development version', so that changes can be
+   made easily. Change to the folder where 'setup.py' is located and run
+   `pip install -e .`
+
+As of Version 0.1.0, this will also install one GUI-like application called
+'magnetictrap'. It is located at the following paths:
+
+- Posix: `<path to virtual environment>/bin/magnetictrap`
+- Windows: `<path to virtual environment>\Scripts\magnetictrap.exe`
+
+Don't move this file around. If you want to have a shortcut on the desktop or
+somewhere else, please create a shortcut, alias or symbolic link - whatever it
+is called on your system.
+
+
+Updating
+--------
+
+Find out if the installation was done using git:
+
+- Open a command line and activate the environment.
+- Change to the directory, where the 'setup.py' file of
+  the package is located
+- Issue a `git status` command. If the result is something along the line
+  `fatal: Not a git repository`, git was not used for the installation
+- Updating *with* git:
+  - Issue a `git pull origin` command to update the package
+- Updating *without* git:
+  - Delete the folder that contains the 'setup.py' file
+  - [Download][download] the software again and unpack it
+- Change to the folder where 'setup.py' is located and run
+`pip install -e .` again to installe the applications
+- Good Luck
+
+
+[python]: https://www.python.org/
+[git]: https://git-scm.com/
+[download]: https://git.cpi.imtek.uni-freiburg.de/holgi/arduino-timetable/archive/master.tar.gz

arduino_scripts/Servo-Magnetic-Trap/Servo-Magnetic-Trap.ino

@@ -0,0 +1,108 @@
+// include the servo library
+#include <Servo.h>
+
+// create servo object to control a servo
+Servo Servo_1;
+Servo Servo_2;
+
+// constants: input and output pins
+const int SWITCH_PIN = 4;
+const int SERVO_1_PIN = 9;
+const int SERVO_2_PIN = 10;
+
+// constants: the trap can be open or close.
+// easier to understand than HIGH or LOW
+const int CLOSED = LOW;
+const int OPEN = HIGH;
+
+// constants: positions of servo end points and positioning delay in microseconds
+const int SERVO_1_CLOSED = 7;
+const int SERVO_1_OPEN = 100;
+const int SERVO_2_CLOSED = 159;
+const int SERVO_2_OPEN = 64;
+const int SERVO_DELAY = 10;
+
+// variables
+int switch_state = LOW;     // the current state of the input pin
+int trap_state = OPEN;      // will a high switch state change the servo position
+
+void setup() {
+  // setup code here, run once after reset or power on:
+
+  // setting pins to input, and output
+  pinMode(SWITCH_PIN, INPUT);
+  pinMode(LED_BUILTIN, OUTPUT);
+
+  // initialize serial connection
+  Serial.begin(9600);
+
+  // attach the servos
+  Servo_1.attach(SERVO_1_PIN);
+  Servo_2.attach(SERVO_2_PIN);
+
+  // moving servos to defined position
+  Servo_1.write(SERVO_1_OPEN);
+  Servo_2.write(SERVO_2_OPEN);
+
+  // read the current switch state
+  switch_state = digitalRead(SWITCH_PIN);
+}
+
+
+void loop() {
+  // main code, run repeatedly:
+
+  // MANUAL SWITCH STATE
+  // -------------------
+
+  // read the current state of the input
+  int current_switch_state = digitalRead(SWITCH_PIN);
+
+  // change trap position if the switch state has changed
+  if (current_switch_state != switch_state) {
+
+    // register the change
+    switch_state = current_switch_state;
+
+    if (switch_state == HIGH) {
+      // show that there is currently a input signal
+      // and close the trap
+      digitalWrite(LED_BUILTIN, HIGH);
+      trap_state = close_trap();
+    } else {
+      // show that there is currently no input signal
+      // and open the trap
+      digitalWrite(LED_BUILTIN, LOW);
+      trap_state = open_trap();
+    }
+  }
+
+
+  // COMMANDS SEND OVER USB
+  // ----------------------
+
+  // read the incoming data
+  char inByte = Serial.read(); 
+  
+  if (inByte == 'o') {
+    // the open trap command was sent
+    trap_state = open_trap();
+  } else if (inByte == 'c') {
+    // the close trap command was sent
+    trap_state = close_trap();
+  }
+}
+
+int open_trap() {
+  Servo_1.write(SERVO_1_OPEN);
+  Servo_2.write(SERVO_2_OPEN);
+  return OPEN;
+}
+
+int close_trap() {
+  Servo_1.write(SERVO_1_CLOSED);
+  Servo_2.write(SERVO_2_CLOSED);
+  return CLOSED;
+}
+
+

arduino_scripts/Test-Arduino-Timetable/Test-Arduino-Timetable.ino

@@ -0,0 +1,41 @@
+/*
+  Reading a serial ASCII-encoded string.
+
+ This sketch demonstrates the Serial parseInt() function.
+ It looks for an ASCII string of comma-separated values.
+ It parses them into ints, and uses those to fade an RGB LED.
+
+ Circuit: Common-Cathode RGB LED wired like so:
+ * Red anode: digital pin 3
+ * Green anode: digital pin 5
+ * Blue anode: digital pin 6
+ * Cathode : GND
+
+ created 13 Apr 2012
+ by Tom Igoe
+ 
+ modified 14 Mar 2016
+ by Arturo Guadalupi
+
+ This example code is in the public domain.
+ */
+
+
+void setup() {
+  // initialize serial:
+  Serial.begin(9600);
+  // make the pins outputs:
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, LOW);
+}
+
+void loop() {
+    char inByte = Serial.read(); // read the incoming data
+    if (inByte=='o'){
+      digitalWrite(LED_BUILTIN, LOW);
+    } else if (inByte=='c'){
+      digitalWrite(LED_BUILTIN, HIGH);
+    }
+  
+}
+

arduino_timetable/__init__.py

@@ -10,4 +10,4 @@ from .timetable import (
     TimedCommands
     )
 
-__version__ = '0.0.1'
+__version__ = '0.1.0'

arduino_timetable/apps.py

@@ -0,0 +1,17 @@
+import os
+
+from . import run_application
+
+def check_icon(icon_name):
+    own_path = os.path.abspath(__file__)
+    own_dir = os.path.dirname(own_path)
+    icon_path = os.path.join(own_dir, 'appicons', icon_name)
+    if os.path.isfile(icon_path):
+        return icon_path
+    return None
+
+
+def run_magnetic_trap():
+    arduino_commands = {'open': 'o', 'close': 'c'}
+    icon = check_icon('Household-Mouse-Trap.ico')
+    run_application(arduino_commands, "It's a trap!", icon=icon)

arduino_timetable/gui.py

@@ -129,7 +129,11 @@ class ParsedCommandsPanel(tk.Frame):
         self._parent = parent
         self.label = tk.Label(self)
         self.label.pack(fill=tk.X, pady=5, padx=5)
-        self.messages = tk.Message(self, text='', font=("Courier", 8))
+        self.messages = tk.Message(self,
+            text='',
+            font=("Courier", 8),
+            width=250
+            )
         self.messages.pack(fill=tk.X, pady=5, padx=5)
         self.pack(side=tk.TOP, fill=tk.X)
 
@@ -275,7 +279,7 @@ class Application(tk.Frame):
         ''' selecting a new excel file with scheduled_commands '''
         # open the file selection dialog
         opts = {
-            'initialdir': '~/',
+            'initialdir': '~/Desktop',
             'filetypes': [('Excel Files', '.xlsx')],
             'multiple': False}
         excel_file = tk.filedialog.askopenfilename(**opts)

arduino_timetable/timetable.py

@@ -74,7 +74,7 @@ def parse_time_table(timetable, available_commands=None):
         # add a ScheduledCommand to the resulting list
         tc = ScheduledCommand(delta, raw_command, cmd)
         timed_commands.append(tc)
-    return timed_commands
+    return sorted(timed_commands, key=lambda tc: tc.delta)
 
 
 def parse_excel_file(path, available_commands=None):
@@ -122,7 +122,7 @@ def parse_excel_file(path, available_commands=None):
         # add a ScheduledCommand to the resulting list
         tc = ScheduledCommand(delta, raw_command, cmd)
         timed_commands.append(tc)
-    return timed_commands
+    return sorted(timed_commands, key=lambda tc: tc.delta)
 
 
 def parse_time_cell(excel_cell):

pyinstaller_make.bat

@@ -1,10 +0,0 @@
-pyinstaller ^
-    --noconfirm ^
-    --additional-hooks-dir=. ^
-    --hidden-import=packaging ^
-    --hidden-import=packaging.version ^
-    --hidden-import=packaging.specifiers ^
-    --hidden-import=packaging.requirements ^
-    --name MagneticTrap ^
-    --icon Household-Mouse-Trap.ico ^
-    run_magnetic_trap.py

run_magnetic_trap.py

@@ -1,9 +0,0 @@
-from arduino_timetable import run_application
-
-if __name__=='__main__':
-    arduino_commands = {'open': 'o', 'close': 'c'}
-    run_application(
-        arduino_commands,
-        "It's a trap!",
-        icon='Household-Mouse-Trap.ico'
-        )

setup.py

@@ -117,4 +117,17 @@ setup(
     #     'test': ['pytest'],
     # },
 
+    # if and what non python files be included?
+    include_package_data=True,
+    package_data={
+        'arduino_timetable': ['appicons/*.ico'],
+    },
+
+    # defining entry points, escpecially console script:
+    entry_points={
+        'console_scripts': [
+            'magnetictrap = arduino_timetable.apps:run_magnetic_trap',
+        ],
+    },
+
 )